Waste Water Evaporator

Paying too much for Waste Water Disposal?

Evaporate for as little as 6¢ per gallon
 (Based upon Natural Gas)

Reduce up to 98% of Waste Water

The EVP waste reduction systems will transfer waste water automatically from a collection tank to an evaporator chamber.  All that remains when the process is complete is a condensed residual of slurry that can be easily disposed of, thus 
reducing unusable water volume and dramatically lowering disposal cost.

Evaporate Waste Such AS:

  • Emulsified Oils
  • Water Based Ink
  • Floor Scrubber and Mop Water
  • Spent Acid/Alkali Bath
  • Metal Finishing
  • Stamping & Die Casting Solution
  • Paint Booth Solutions
  • Phosphatizing Waste Compound
  • Water Soluble Coolants & Oils
  • Part Washer Effluent
  • Compressor Condensate
  • Process Waste Water

Not Suitable for Combustible Materials

Construction:

Mild Steel
304 Stainless Steel
316L Stainless Steel
AL-6XN Stainless Steel

 Energy Source:

Steam, Electric, and Natural Gas

 

 

 Standard Electric Requirements:
208, 230/460V 3 Phase, 60 Hz.
(single phase available)

 Compress Air:

80 psi minimum required on models with transfer pump.

 

Model Evaporating Rate Approx Dimension
L         W         H		 Tank Capacity
EVP-2 2-4 GPH 48"  X  20"  X  36" 75 gallons
EVP-8 6-10 GPH 80"  X  30"  X  72" 150 gallons
EVP-16 15-24 GPH 100" X 48"  X 84" 225 gallons
EVP-32 30-35 GPH 120" X 48"  X 84" 350 gallons
EVP-64 60-68 GPH 144" X 48"  X 84" 550 gallons
EVP-80 78-85 GPH 180" X 60"  X 84" 725 gallons
EVP-120 115-125 GPH 210" X 72"  X 96" 950 gallons

Larger Volume units available upon request.